What Is Chargeable Weight in Air Freight? Calculation Explained

6 min read
What Is Chargeable Weight in Air Freight? Calculation Explained

Chargeable weight is the higher of actual and dimensional weight. Learn the formula, the 6000 and 5000 divisors, rounding, multi-piece examples and how to cut the figure.

Two cartons can weigh the same on a scale and still cost very different amounts to fly. The difference is the space they take on the aircraft. Airlines handle that by billing on chargeable weight, and getting the calculation wrong is one of the most common reasons an air freight invoice does not match the quote.

This guide explains chargeable weight, how to calculate dimensional weight for air freight, which divisor to use, how rounding works and how to bring the figure down.

What is chargeable weight?

Chargeable weight is the weight an airline or forwarder uses to price your shipment. It is the greater of two figures:

  • Actual gross weight. The shipment's weight on the scale, including the goods, cartons, pallets and securing materials.
  • Dimensional weight. Also called volumetric weight. It converts the space your cargo takes up into a weight equivalent.

Aircraft run out of space before they run out of lifting capacity on light cargo, and run out of lifting capacity before space on dense cargo. Charging on the higher figure protects the airline in both cases. Our guide on air cargo charges in India shows where chargeable weight sits in a full quote.

The dimensional weight formula

For centimetres and kilograms:

Dimensional weight (kg) = length x width x height (cm) divided by 6000

For inches and pounds, the equivalent divisor is 366 for the standard air cargo rate. The 6000 divisor is the standard for general air cargo and equals 167 kg per cubic metre. Cargo denser than that is charged on actual weight, and lighter cargo on dimensional weight.

Which divisor should you use?

The divisor depends on who carries the shipment:

ServiceTypical divisor (cm)Equivalent density
Airline air cargo through a forwarder6000167 kg per cubic metre
Express and courier services5000200 kg per cubic metre

A lower divisor gives a higher dimensional weight, so the same box bills heavier with a courier than with general air cargo. This is why an express quote and a consolidated air freight quote are not directly comparable until you check which divisor each one uses. Some carriers also set their own, so confirm the figure in writing.

How to calculate dimensional weight for air freight, step by step

  1. Measure each piece. Use the outer dimensions of the packed carton or pallet, including any overhang.
  2. Calculate the volume. Multiply length by width by height for each piece.
  3. Divide by the divisor. Use 6000 for general air cargo or 5000 where the carrier applies it.
  4. Weigh the shipment. Use the gross weight, not the net weight of the goods.
  5. Compare. The higher of dimensional and actual weight is the chargeable weight.
  6. Round as the carrier requires. See the rounding section below.
  7. Apply the rate. Multiply the chargeable weight by the rate per kg.

Worked examples

Example 1: Dense cargo

A carton of metal fittings measures 50 x 40 x 30 cm and weighs 45 kg.

  • Dimensional weight: 50 x 40 x 30 = 60,000, divided by 6000 = 10 kg
  • Actual weight: 45 kg
  • Chargeable weight: 45 kg

The shipment is dense, so the scale weight decides the price.

Example 2: Light, bulky cargo

A carton of soft toys measures 90 x 60 x 70 cm and weighs 12 kg.

  • Dimensional weight: 90 x 60 x 70 = 378,000, divided by 6000 = 63 kg
  • Actual weight: 12 kg
  • Chargeable weight: 63 kg

You pay for 63 kg even though the carton weighs 12 kg.

Example 3: Several pieces

Add the volumes and the weights for the whole shipment before you compare them. Three cartons of 60 x 40 x 40 cm, each weighing 15 kg:

  • Volume of one carton: 96,000 cubic cm. For three cartons: 288,000 cubic cm
  • Dimensional weight: 288,000 divided by 6000 = 48 kg
  • Actual weight: 3 x 15 = 45 kg
  • Chargeable weight: 48 kg

Dimensional weight is higher here, so it sets the price. Do not work out the figure for each carton and then round each one separately, because that can inflate the total.

Rounding rules

The IATA standard rounds chargeable weight up to the next 0.5 kg. A figure of 43.31 kg becomes 43.5 kg. Some couriers and express services round up to the next whole kilogram instead, and published guidance on express rounding is inconsistent. Ask your carrier which rule applies and get it in writing.

Rounding matters most on small shipments, where an extra half kilo is a large share of the bill.

Positional weight for special cargo

Some cargo, such as a motorcycle or a large machine, takes up a full position on an aircraft pallet or container regardless of its weight. In these cases the airline may charge for the position and not just the weight. Ask for a quote for the specific item.

Chargeable weight in other modes

Sea freight uses a similar rule for shared containers, with 1 cubic metre treated as 1,000 kg. Full container loads are priced per container. Our guide on how to calculate international freight charges explains both.

How to reduce chargeable weight

  • Right-size the cartons. Empty space inside a box adds billed volume for nothing.
  • Pack tighter. Nest items, flat-pack where possible and remove excess padding that does not protect the goods.
  • Check pallet height. Tall pallets add volume. Compare the cost of palletising with loose cartons, because for light cargo palletising can raise the chargeable figure.
  • Measure accurately. Correct measurements avoid invoice adjustments after the cargo is checked at the airport.
  • Consolidate. Combining small shipments with other cargo can lower the rate per kg.
  • Compare modes. If the cargo is light, bulky and not urgent, sea freight may cost less than air.

Common mistakes

  • Measuring the product instead of the packed carton.
  • Using net weight instead of gross weight.
  • Mixing up divisors between airline and courier quotes.
  • Calculating per carton and rounding each one instead of totalling the shipment first.
  • Not checking the carrier's rounding rule.

How IWCC helps

Interworld Cargo Care is IATA accredited and has moved cargo since 1993. Our air freight service confirms measurements and the divisor before we quote, so the figure on your invoice matches the one you agreed.

Get an air freight quote

Send us your carton sizes and weights and we will confirm the chargeable weight and quote the cost. Get a free quote or call 098110 59654.

Frequently Asked Questions

What is chargeable weight in air freight?
The higher of the actual gross weight and the dimensional weight. It is the weight your freight charge is based on.
What is the dimensional weight formula for air freight?
Length x width x height in centimetres, divided by 6000 for general air cargo.
Is the divisor 5000 or 6000?
6000 is standard for general air cargo. Express and courier services often use 5000.
How is chargeable weight rounded?
The standard is up to the next 0.5 kg. Some carriers round up to the next whole kilogram.
Does dimensional weight apply to heavy cargo?
It is calculated for every shipment, but dense cargo is charged on actual weight because that figure is higher.

Related Articles

Top 10 Logistics Companies in Delhi
logistics companies in delhi

Top 10 Logistics Companies in Delhi

Compare 10 logistics companies in Delhi NCR for courier, freight, warehousing and international cargo. See what each offers and how to pick the right one.

Newsletter

Join Our Newsletter

Get freight market updates, regulatory changes and company news from IWCC, delivered straight to your inbox.

No spam. Unsubscribe anytime.